Concrete Driveways in San Antonio, TX

CONCRETE DRIVEWAYS

Concrete driveways provide a variety of practical and aesthetic possibilities that set them apart from other types of paving. Although you might be able to save a little money by completing the concrete work yourself, it will take a lot of time, and you might get the professional finish that you were aiming for. For this reason, you should call on the best concrete driveway contractors in San Antonio for your next residential or commercial job to ensure that your concrete work is completed to a high standard.

Types of Concrete Driveway Service We Offer in San Antonio

At Rocking S Concrete, we offer more than the traditional concrete driveway that’s most common in residential and commercial properties. We customize designs and offer unique finishes that complement your building’s aesthetic.

Stamped Driveways

We specialize in stamped concrete a selection that imitates several types of stones, including slate and flagstone, tile, brick, and even wood. With its many pattern and color options, this choice has become quite popular for enhancing driveways. Stamped concrete also offers an inexpensive alternative to paving stones and requires less upkeep.

Engraved Driveways

We’re also your go-to for concrete engraving. With this method, our craftsmen carve patterns into the concrete that leaves a permanent finish that won't fade or lose its bond. The decorative potential is truly amazing. Any designs that we imprint, such as brick, tile, or cobblestones, will last as long as the surface itself.

Stained Driveways

We can also stain your concrete driveway to improve its appearance in a cost-effective and adaptable method. The stain coat creates a permanent, fade-resistant color that won't flake off or peel away from the surface. You can also select between acid-based chemical stains and water-based stains.

The Driveway Construction Process

As one of the most experienced concrete driveway contractors in San Antonio, we are transparent about our process. When you visit with our reps to review your free estimate and the project details, we’ll outline every step of our process which includes the following.

Remove Existing Material

The first step involves demolishing and removing any existing paving, vegetation, or debris from the worksite. This gives us a clear space to start the next step.

Excavation, Grading and Sloping

Next, we dig out the existing material and soil to create enough space for the driveway and extra space for drainage. We ensure any soft spots are excavated and then back-filled with compacted sub-base material.

Strength Check or Proof Roll

From there, we perform the proof roll test to check the profile of the subgrade layer before installing the overlying pavement layers. This is done by rolling a heavy truck over the subgrade layer.

Prepare the Sub-base

Once the area is prepared, the sub-base is graded or leveled to fit the final paving's intended profile. We make sure no holes are left in the sub-base. However, any openings that are found are filled with sand or stone dust and then compacted before the laying course is applied.

Binder and Surface Course

Once everything checks out, we move to the binder course which involves distributing the load to the base course that’s located between the surface and the base course. Immediately below the surface or binder course, the base course provides more load distribution and sub-surface drainage.

Butt Joints and Transitions

Butt joints are the places where the new driveway concrete joins the sidewalk. To guarantee proper grading and water runoff, we give some extra attention to these transitional zones. Also, to prevent cars and pedestrians from noticing a difference in the surfaces, butt joints are crucial.

Install Top-coat

The next step brings us to the top-coat which eliminates any slippery surfaces, mitigates cracking during seasonal temperature changes, and helps retain a uniform appearance.

Reasons to Choose Our Driveways Construction Service

We offer our clients a variety of driveway finishes to meet their design preferences. At the same time, we go beyond the aesthetics to provide a durable driveway that provides a smooth parking space that withstands the elements and provides proper drainage. Contact us today so we can turn the driveway of your dreams into reality!

FAQs

What is the Difference Between Concrete and Cement?

Although it’s not rare to see the terms “concrete” and “cement” often used interchangeably. Cement is actually an ingredient of concrete. Concrete is a mixture of water, aggregated materials, and gravel or sand.

Can I do Concrete Work on My Own?

On a small scale, concrete is easy to work with, but without proper knowledge and the right equipment, it can be challenging. If you don’t know what you’re doing, it could lead to poor concrete surfaces. Instead, consider hiring a professional contractor like Rocking S Concrete Contractors.

When Will My Project be Done?

The timeframe for completing concrete work can vary significantly based on the scope of your project. But, we can give you an estimated time. Usually, we can finish our projects like installing patios and driveways in 2-5 days.

How Long Does Concrete Take to Dry?

Concrete typically takes 24 to 48 hours to dry enough for you to walk or drive on it. In Fact, Concrete gets stronger and stronger as time goes on.

Does Rain Damage New Concrete?

Yes, the sudden impact of the rain on freshly placed concrete surfaces can give rise to unexpected challenges. The key to preventing damage to the concrete surface by a rainstorm is to source concrete blankets or check out the weather updates before starting the project.

Request a Quote for Your Work